The Xplor-52i takes the core Xplor-52 features and adds capabilities designed for industrial monitoring and control applications. Its 12 I/O channels are configured as 6 optically isolated inputs and 6 relay outputs, which also eliminates the need for an I/O socket block. The standard Xplor-52 capabilities are further enhanced with a much heftier 5 volt regulator and an RS-422 serial port that can also be used with an RS-232 port or wired as RS-485. Other features include a power LED, reset switch, power supply jack, and screw terminals for input power and all I/O connections. Xplor-52i This model includes screw terminal connections for 6 relay outputs and 6 optically isolated bipolar inputs. An optional output connector provides access to the TTL-level signals used to drive the relay coils. OEM versions with custom output capabilities may also be available. Board Dimensions: 4.00" x 5.00" Technical Specifications: OUTPUTS Relay Contact Arrangement: Normally Open, SPST Relay Contact Ratings: 10A @ 24VDC and 10A @ 115VAC (with resistive loads) Relay Coil Rating: 12V, 360 Max. Working Voltage: 150VAC or 200VDC Suppressor Clamping Voltage: 395V @ 50A (20 µsec pulse) INPUTS Isolation Voltage: 5000V Turn-on Voltage: 1.9V typical (1.5V min., 4.4V max.) Turn-off Voltage: 1.3V typical (1.1V min., 2.5V max.) Maximum Input Voltage: 22V (continuous) Starter packages, peripherals, accessories, and sensors are also available. BUYER PROTECTION All BlueEarth controller products and accessories are backed by a 90-day limited warranty as well as an accident protection policy. For as long as the product is manufactured by BlueEarth, we will repair or replace any inoperative product for 50% of the current retail price regardless of the electrical or physical damage. Some restrictions may apply. Contact BlueEarth for more details.   [table of contents] [BlueEarth] [microcontrollers] [environmental control systems] [order products] [technical support] [custom design] ©1999-2002 BlueEarth, LLC. Last Updated September 3, 2002 Webmaster